Truck trailer pintle coupling scales are a must-have device for truck trailers over 3.5t.
Simple question: Do you know how heavy your pintle ring is? Which means, how much weight is on your tow bar?
- If you feel your trailer is pushing your vehicle forward during braking, then you have too much weight on your coupling.
- If your coupling is suffering, excess wear, you have too much weight on your coupling.
- Too little weight on your coupling results in sway.
Correct adjust trailer balance is made after measuring your coupling head weight.
The ideal trailer weights are
- 5% of ATM for tandem trailers
- 7% of ATM for single axle trailers.
Heavier weights harm wear and tear on couplings, braking and fuel economy.
Example, if your trailer ATM is 5t then your head weight on your truck trailer should be 250kg.
The Hayman Reese tow ball scales measures up to 300kg. Click the image to buy this product.
Note: Carefully lower your chassis rail onto the tow ball scales to obtain your reading.
- Shift weight from the front of the axle set to a more central location, if you are heavy on the scales. This action will lower weight on your tow ball, allowing your vehicle to become lighter and therefore brake more effectively.
- If you are light on the tow ball scales then, your trailer will sway on the highway. Put more weight forward of your front axle.
Overloading your Coupling
Without even visiting this trailer on the right, I can tell you this trailer is heavy on the coupling.
The container is a 1000ltr box holding one ton of water or chemical.
The coupling head weight should be 5% or 50kg.
Now add the weight of the pump on the drawbar to the coupler head weight, and you have heavy braking and coupling wear.
To verify the head weight, a cheap, simple set of scales solves all issues and allows the required adjustments to commence.
Truck Trailer Pintle Coupling Scales